Specification:Thermal Conductivity: 2.1±10%W/mKThickness: 0.2 mmDielectric Breakdown Voltage(Vac): 3.6 KV/mmDielectric Breakdown Voltage(Vdc): 4.6 KV/mmDensity: 2.3±5%g/cm³Operating Temperature: -45~170°CReinforcement Carrier: Fiberglass meshHolding Power 1000g@25°Cusing 1 in2: >40000Holding Power 1000g@80°Cusing 1 in2: >40000(T-Global guarantees a 6-month shelf life at maximum continuous storage temperature of 25°C for maintenance of controlled adhesion to the liner.)*Protective film may be different colors according to the model, it does not affect the function of the product.Application:Electronic components: Electric Vehicles, 5G, Autopilot System, Mobile Phone, AIOT, HPC (High Performance Computing),Server, IC, CPU, MOS, LED, Mother Board,Power Supply,Heat Sink,LCD-TV,Notebook,PC,Telecom Device,Wireless Hub,DDR ll Module, etc.Operating Manual:1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry. 2.After tearing off the protector of the thermal tape, pressed it evenly (just a little strength) with your fingers to make sure the tape has greater contact with the surface. 3.The viscosity of the thermal tape have initial viscosity (40% of its maximum viscosity) and persistent viscosity. At room temperature, it takes 72 hours to achieve the maximum adhesive strength. 4.In the application process, appropriate heating (60 ~ 70 °C) will greatly contribute to the effective of adhesive, and as soon as possible to achieve maximum adhesion. In the lower temperature of the winter, appropriate heating is a tip to increase the viscosity of the thermal tape.Storage:Store in a cool, dry place away from direct sunlight.