Overview Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It incorporates Raspberry Pi's own RP2040 microcontroller chip, with a dual-core Arm Cortex M0+ processor running up to 133 MHz, embedded 264KB of SRAM, and 2MB of onboard Flash memory, as well as 26x multi-function GPIO pins. For software development, either Raspberry Pi's C/C++ SDK or the MicroPython is available. There are also complete development resources and tutorials to help you get started easily, and integrate it into end products quickly. Features 1.RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2.Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 3.264KB of SRAM, and 2MB of onboard Flash memory 4.Castellated module allows soldering direct to carrier boards 5.USB 1.1 with device and host support 6.Low-power sleep and dormant modes 7.Drag-and-drop programming using mass storage over USB 8.26 × multi-function GPIO pins 9.2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels 10.Accurate clock and timer on-chip 11.Temperature sensor 12.Accelerated floating-point libraries on-chip 13.8 × Programmable I/O (PIO) state machines for custom peripheral support Package Content 1 x Raspberry Pi Pico with pre-soldered header 1 x 1*3PIN yellow pin header 1 x Breadboard 1 x USB-A to micro-B cable 1 x Jumper wires 1 x Sensors Pack