Remove clutter in your installations, replace up to 6 individual power over ethernet injectors with this single gigabit POE module. Wall Mounted PoE injector Extend power to 328 ft or 100 meters This device offers* 10/100/1000 operation * 6 shielded RJ45 jacks with Data + Power out to connect to your device * power per port limited to 650 per pair = 1300 ma * 6 shielded RJ45 jacks with Data in - connect to your switch * dual 2.1mm x 5.5mm DC power jacks* use for redundancy or increased power * LED power status * we offer 7 different power supply options Used to provide PoE power to: * IP phones like Polycom, Cisco, Yealink, Grandstream, Shoretel * WiFi Access points * IP Cameras * 802.3af devices with 48 volt power supply* 802.3at devices with 56 volt power supply These devices share power and data on either 2 or 4 pairs in the ethernet cable. Mode A DC input provides power on the data lines 1 and 2, and 3 and 6. Mode B DC input provides power on the data lines 4 and 5, and 7 and 8. Use both for 802.3at operation (jumper cable included). All devices receive the same voltage - choose a power supply with more available power than the total all devices. Check device specs for power needs, it is under 4 watts for most Phones, other devices need more We offer 24v, 48v and 56v supplies, with 60 and 120 watt version, also 12 port versions. Full details and data sheet at http://wifiqos.com/